Product ID:SCOTCH 6065 SPRA-MOUNT ADHESIVE (PB)
MSDS Date:04/25/1992
FSC:8040
NIIN:00-171-1535
MSDS Number: BDFJP

3M CO

3M CTR 224-2S-25
ST. PAUL, MN 55144-1000
US

Emergency Phone: 612-733-1341

Info Phone: 612-733-1110

Cage: 76381

MINNESOTA MINING AND MFG CO, DBA 3M

SAINT PAUL, MN 55144-1000 US

Telephone: 866-556 5712 / 612-733-1110

Cage: 76381

METHYL CHLOROFORM (1,1,1-TRICHLOROEHANE) (SARA III)

CAS: 71-55-6

RTECS: KJ2975000

Fraction By Weight: 65%

OSHA PEL 350 PPM/450 STEL

ACGIH TLV: 350 PPM/450STEL;9192

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

ACRYLIC RESIN, TERPENE RESIN BLEND

Fraction By Weight: <15%

PHTHALATE PLASTICIZER

Fraction By Weight: <1%

PROPANE-ISOBUTANE BLEND(PERCENT APPROXIMATE)

Fraction By Weight: 25%

Effects of Overexposure:EYE:IRRIT; SKIN:PRLNGD MAY DEFAT. VAPOR
INHAL:DIZZ; DELIB MISUSE: INHAL/INGEST CAN BE HARMFL,FATAL

First Aid:EYES:IMMED FLUSH W/H*20 10 MIN; CALL MD. SKIN:WASH W SOAP &
H*2O. INHAL:PROVIDE FRESH AIR.

Flash Point Method:TCC
Flash Point:-50F,-46C
Upper Limits:FLAMM GAS
Extinguishing Media:CO*2, FOAM,DRY CHEMICAL
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED PRESSURE DEMAND SCBA
AND FULL PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:EXTREMELY FLAMM. TREAT AS A PRESSURIZED
CNTNR. OVERHEATED, CLSD CNTNRS ADJ TO FIRE COULD EXPLO DUE TO
INTERNAL PRESS BUILDUP. THERMAL DECOMP PRODS (SUPP DATA)

Handling and Storage Precautions:KEEP FR IGNIT SOUCES; DO NOT STORE
ABOVE 120 F
Other Precautions:USE IN ADEQTLY VENTLTD AREA. AVOID EYE CONTACT &
PROLNGD BREATHING & SKIN CONTACT.

Ventilation:LOCAL EXHAUST RECOMMEND
Eye Protection:SAFETY GLASSES
Supplemental Safety and Health

Boiling Pt:B.P. Text:SUPP DATA
Vapor Pres:SUPP DATA
Vapor Density:4.6
Spec Gravity:0.880 (H*2O=1)
Evaporation Rate & Reference:0.4 (ETHER=1)
Solubility in Water:NIL
Appearance and Odor:TRANSLUCENT LIQUID; SWEET ODOR
Percent Volatiles by Volume:93(WT)

Stability Indicator/Materials to Avoid:YES
HCL AND POSSIBLE AMOUNTS OF CHLORINE AND PHOSGENE WHEN SUBJECTED TO
EXCESSIVE HEAT OR FLAME.
Stability Condition to Avoid:DO NOT PUNCTURE OR INCINERATE AEROSOL
CNTNR. DO NOT STORE AT TEMPERATURES ABOVE 120F.
Hazardous Decomposition Products:CO,CO*2,HCL & POSS TRACE OF CL &
PHOSGENE W/EXCESS HEAT, FLA

Waste Disposal Methods:INCIN IAW/LOCAL,ST & FED REGS:CONTNS HALOGENS.
EMPTY CANS:DISPOSE IN SANITARY LNDFILL. CAS 71-55-6 & PHTHALATE
PLAST ARE PRIORITY POLLUTANTS(USEPA)CLEAN WATER ACT.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.